RV.Net Open Roads Forum: Tech Issues: Repairing Electric Cord on Old Camper

RV Blog

  |  

RV Sales

  |  

Campgrounds

  |  

RV Parks

  |  

RV Club

  |  

RV Buyers Guide

  |  

Roadside Assistance

  |  

Extended Service Plan

  |  

RV Travel Assistance

  |  

RV Credit Card

  |  

RV Loans

Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Help and Support  |  Contact

Search:   Advanced Search

Search only in Tech Issues

Open Roads Forum  >  Tech Issues

 > Repairing Electric Cord on Old Camper

This Topic Is Closed  |  Print Topic  |  Post New Topic  | 
Page of 2  
Next
Sponsored By:
MsMandyJohnson

KY

New Member

Joined: 04/12/2012

View Profile


Offline
Posted: 04/12/12 09:54pm Link  |  Print  |  Notify Moderator

We recently purchased a 1956 Holiday Rambler. The seller said we needed to replace the electrical plug on the cord. I know nothing about making repairs like this. What kind of plug do I need female or male? And what amps or voltage does a camper use? Any help would be great. Thanks again.

larry cad

ohio

Senior Member

Joined: 05/23/2004

View Profile





Offline
Posted: 04/12/12 10:44pm Link  |  Print  |  Notify Moderator

Based on the age of your RV, I would guess that you will need a 30 amp male plug. The plug you will need is available at most RV outlets, and at places like Lowes and Home Depot. It will look something like this, with 3 prongs as shown:




Today is my personal best for most consecutive days alive.

Our Travel Blog

sljkansas

Miami Co. Kansas

Senior Member

Joined: 09/28/2005

View Profile


Offline
Posted: 04/13/12 05:58am Link  |  Print  |  Notify Moderator

If it didn't come with air conditioning it may well be a 20 amp male plug that goes on the end of the power cord. Dad had TT is the late 60's and early 70's that didn't have AC so the power cord was a regular 20 amp extention cord. So you first need to find out what amperage you need for your trailer.


Steve & Linda
Son married (1 DIL, 3 granddaughters 1 grandson)
Daughter can now be called a Teacher.
Miami Co. Kansas
2004 F350 CC dually 8ft bed 6.0 PSD
2009 Bighorn 3670RL
B&W under bed hitch with 18k companion hitch


1995brave

San Antonio, TX

Senior Member

Joined: 01/24/2006

View Profile


Offline
Posted: 04/13/12 06:17am Link  |  Print  |  Notify Moderator

You may have to replace the cord also, especially if it is the original. Just had to chop up and throw away a 30 year old extension cord because the insulation became brittle. I had it plugged into a GFI outlet, picked up the cord to move it, and asi bent the cord the GFI popped. Unplugged it and started stripping back the outside rubber insulation and found the inside insulation for the black(hot), white(neutral), and green(ground) wires was brittle and breaking. As i bent the cord pieces of each fell off and exposed the copper wire.

gbopp

The Keystone State

Senior Member

Joined: 08/03/2008

View Profile


Offline
Posted: 04/13/12 04:43am Link  |  Print  |  Notify Moderator

Welcome to the forum.
A 1956 HR sounds cool, can you post some pictures?

pulsar

Lewisville, NC

Senior Member

Joined: 12/30/2001

View Profile



Good Sam RV Club Member


Posted: 04/13/12 05:23am Link  |  Print  |  Notify Moderator

Moved from Forum Technical Support to Tech Issues.

beemerphile1

I'm 57, I'm not a

Senior Member

Joined: 04/20/2007

View Profile





Offline
Posted: 04/13/12 06:17am Link  |  Print  |  Notify Moderator

sljkansas wrote:


...it may well be a 20 amp male plug that goes on the end of the power cord. Dad had TT is the late 60's and early 70's that didn't have AC so the power cord was a regular 20 amp extention cord...


Most likely 15 amp male.

15 amp plug;


20 amp plug;



Even if you are on the right track, you'll get run over if you just sit there.
- Will Rogers, American actor


2006 Weekend Warrior FK1900/1998 Ford E150 4.6L = 8MPG
2009 Aliner Sport/2009 Pontiac Vibe 1.8L = 22MPG


MsMandyJohnson

KY

New Member

Joined: 04/12/2012

View Profile


Offline
Posted: 04/13/12 07:18am Link  |  Print  |  Notify Moderator

Thanks everyne for all the help. I will try the 15 amp male plug. Is it pretty easy to put the new plug on and arranging the wire? Would it be wrong to try and replace the plug first to see if the works? And if that don't work then check the cord to see if it might need replaced? I will indeed get some pictures to upload this weekend. Also the camper looks like it has a heater in it.

MEXICOWANDERER

las peƱas, michoacan, mexico

Senior Member

Joined: 06/01/2007

View Profile


Offline
Posted: 04/13/12 08:09am Link  |  Print  |  Notify Moderator

When you go to buy your plug try and get a marine grade 15 amp plug with a nylon body and nickel plated prongs. Available at West Marine (We Make Boating More Profitable). Far and away better weather resistance and super easier to work with.

MsMandyJohnson

KY

New Member

Joined: 04/12/2012

View Profile


Offline
Posted: 04/13/12 10:36am Link  |  Print  |  Notify Moderator

Hi Guys,
After playing around with the wires on the electrical cord i treid to pull the cord out and well there is no cord there. Just a few wires. Looks like two black wires and a cream colored wire. So how do I work on adding an electrical extension cord to this?

This Topic Is Closed  |  Print Topic  |  Post New Topic  | 
Page of 2  
Next

Open Roads Forum  >  Tech Issues

 > Repairing Electric Cord on Old Camper
Search:   Advanced Search

Search only in Tech Issues


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:

© 2013 RV.Net | Terms & Conditions | PRIVACY POLICY | YOUR PRIVACY RIGHTS