I think this will come out too big. If so how do I resize it?
Well, It came up in the preview but won't post here. So I guess posting photos is still to "techie" for me. Maybe at some future date this will get easier and I will be able to show you my rig.
GMC Sierra 3500 D/A, SRW, 4X4, Torklift, Rancho's, Ride-Rite's.
Northern Lite 10-2000RR
2000 Ford F-250SD, XLT, 4X4 Off Road, SuperCab
w/ 6.8L (415 C.I.) V-10/3:73LS/4R100
Banks Power Pack w/Trans Command & OttoMind
Sold Trailer - not RV'ing at this point in time
When you are posting or editing, use the image button button in the red toolbar above. There is a field for entering the url address of the image and there is also a Height and Width field. The picture below is the size that comes out when you use 300 in the height and 400 in the width boxes. (This image's natural size is 1200 X 1600)
elementary math. Right click on the picture at either the source or in Preview and write down the pixel sizes. Start by dividing each by two and as previously said, put those numbers in the Height and Width boxes. Do a preview again and If still too large or too small, divide by a different factor.
You don't need to do a new post or topic as it will automatically be added to any posts you have made where it was checked by default to show your signature.
"Wow, that red toolbar sure is obnoxious. It's a nice deep shade of blue on RV.NET"
Ahh, I see the confusion now. You're right, and it's probably a teal color from the Trailer Life Forum perspective. Well, as you can see above, a picture speaks a thousand color blind words.
Offline
