RVGOODTIMES
Warren, Mi
New Member
Joined: 02/27/2007
View Profile
 Offline
|
I Hope someone can tell me where I can tap to hook up a boost guage on my 99 F250 7.3 Diesel seems that the dealer can't pin point the correct line to do this without drilling the intake manifold (don't like that idea).Please Help!!
|
ozman
Ma.
Senior Member
Joined: 06/16/2001
View Profile
|
Have you tried a t-adapter? try this link http://www.pmtdiesel.com/_e/Installation........14/Boost_Line_T_and_Hose_Adapter_Kit.htm
|
J2
away
Senior Member
Joined: 03/03/2002
View Profile
|
On my 2000 f250 (Iwish I kept it) looking into the engine on the left side to the back you should see a small black box with a small line and a plug with wires I tee into that line the line should go back to the intake. Do keep that 7.3 for along time so far the BEST engine in the ford trucks.
|
2RVers
Florida
Senior Member
Joined: 07/22/2006
View Profile
Offline
|
Go to www.dieselmanor.com and look at the left side of the home page there is a heading Install Sheets. Go to that page and you will see a list of all the different engines find the 7.3 liter and there are clear color photos on how to install several gauges if I remember you can click on each photo and enlarge it for a clearer view. I bought a set of gauges and the pillar mount from them and followed their installation instructions and it all came out perfectly, I was very proud of myself!
Rob and Jet
2000 Ford F550 with custom bed
1998 Jayco Designer 3710 fifthwheel
Fred and Barney de Katz
|
RVGOODTIMES
Warren, Mi
New Member
Joined: 02/27/2007
View Profile
Offline
|
Thanks Everyone for the advise, I found the correct line and everything works just fine at last!! I can finally finish this project and move on. A Big Thanks Again to Everyone.
|
|
|
