This is my first post, so please bear with me.
I have a 05 Lance 845, and last weekend, started up gen, ran fine, but no power x-fer.
To keep this post short, I have tested the "Quick change circuit board" to be bad. Only 1.3 vdc output for Solonoid, plus timer not working. Relay solonoid ohms out at 4.3k ohms. (this is good).
So I called Progressive Dynamics, spoke with ? in the service department. I (and PD tech) had trouble trying to find a new board cost. He advised me, ebay, local rv shops, Internet search. To no avail, here I am. Q: Does anybody know where I can get this circut board from?
(Quick change?? not in my 845, under sink, in far rear corner )
And welcome to another exciting version of "STUMP THE BAND!!"
Go figure, I would have thought at least one person would know where to get this circuit board at.
So I recalled the PD folks, Finally got a hold of somebody who knew what is going on there, and was sent a new circuit board for few $ plus shipping. Installed and works great!
Everywhere I called, all they wanted to do was sell me a complete generator switch assembly for major bucks. And all agreed that the "quick change board" is a user replaceable part, but seems that nobody carries it.
This weekend, supposed to get around 110 degrees, So lets go camping!!
(Remember, it's a DRY heat!)
Offline
)
