$200 seems to be the standard "good price" that people have been buying. I just picked up the 3500 at a show for $220. I also read on here that someone picked up a refurbished on ebay for under $100. I would be very curious how that worked out for them.
I have yet to install mine, but I do believe the tube you are referring to is the dimension of the hole opening the jack fits into, not the actual jack support tube. on most heavier trailers it appears that the 2 1/4-inch is the norm. The lighter trailers may have a 2-inch opening and the 3500 will not fit because it is 2 1/4 inch. I guess you could always bore it out to the 2 1/4 if you had to.
Chevy 1/2 Ton Crew Z71 / 3.73 / 5.3L
Rockwood 8317 SS (Yes, it's a 1/2 ton pulling it)
Reese WD System with HP Dual Cam
Primus Brake Controller
Factory Receiver Hitch
McKesh Mirrors
Check this one for sale on Ebay. It is new and is right at $200 delivered.
http://cgi.ebay.com/ebaymotors/VIP-3500-Barker-Electric-Power-Tongue-Jack---RV-Trailer_W0QQitemZ270347943529QQcmdZViewItemQQimsxZ20090223?IMSfp=TL090223137007r16896
A man, his wife, their son, Cody the Goldendoodle and Sadie the Shepherd.
2008 Laredo 284BHS, 2007 Dodge Ram 2500 Quad Cab 4X4 6.7CTD, Equal-i-zer, P3, Subaru RG4300iS
Offline
