raisinkain
Everett
New Member
Joined: 06/16/2009
View Profile
Good Sam RV Club Member
 Offline
|
Anyone know where one can buy interior t-molding to repair trim around tops of end tables and magazine racks in motorhomes. On my bounder it is 1 1/8" wide with t-molding (Offset) I think I have fallen off the edge of the world wide web looking for it..Thanks
|
Kemahsabe
Kemah, TX
Senior Member
Joined: 07/10/2006
View Profile
Good Sam RV Club Member
Offline
|
I also needed the 1 1/8" T-molding, and like you I looked all over. Even searched through the scraps and leftovers at a large RV dealer. Finally found some on Ebay from "rvgod". It wasn't exactly the right color but I took what I could get. Just checked - he doesn't have any right now.
|
don/lou
Brandon MB Canada
Senior Member
Joined: 10/18/2006
View Profile
Good Sam RV Club Member
Offline
|
Have you looked here
http://www.jocyplastics.com/teemoulding.html
Don & Louise
2000 Coachman Catalina 330 MSB /F53
Rear air bags, 4 Koni FSD Shocks & Davis Front TruTrac
2008 Impala- Remco Lube Pump , Blue OX tow bar & Brake Buddy
Winegard roof dish for Bell Expressview HD tv
SL3 HD- TV4RV tripod set up for Direct HD tv
|
Lt46
Cape Cod, Ma.
Senior Member
Joined: 10/15/2002
View Profile
Offline
|
You might want to check this place'scatalog
They made all kinds of mouldings for the RV industry over the years. In fact, they had gold-clad T mouldings for my 96 Prowler TT.
Good luck.
Peter & Dawn
97 Winnebago Adventurer 37RW
96 Prowler 27X SOLD
IAFF L-792
|
lzasitko
Regina, SK Canada
Senior Member
Joined: 11/30/2005
View Profile
Offline
|
Don't know what you guys were searching for but I found this in a couple minutes....
Plastic t molding was really common for all kinds of wood products and still widely available from places that supply that market.
TapeEase
They have widths to 1.5" and different colours and woodgrains
|
|
|
96Bounder30E
America is my home!
Moderator
Joined: 11/21/2002
View Profile
Good Sam RV Club Member
Offline
|
Lt46 wrote:You might want to check this place's catalog
They made all kinds of mouldings for the RV industry over the years. In fact, they had gold-clad T mouldings for my 96 Prowler TT.
Good luck.
West & Barker Inc. was the original supplier for that 1 1/8" t-molding used in the Bounder back in the 90's..........a couple of years ago I ordered a bunch and replaced all of it in my Bounder.........the good news is.....they still make and carry various T-moldings.....the bad news is......they are out of the original "Bounder beige" that your Bounder came with..........as long as color isn't super critical.........they will have exactly what you are looking for........
Eric
96 Bounder 30E-F53(460)
stock Ford intake w/K&N air filter
used Thorley headers
new Banks resonator, muffler, tail pipe and 4" polished SS exhaust tip
|
Kemahsabe
Kemah, TX
Senior Member
Joined: 07/10/2006
View Profile
Good Sam RV Club Member
Offline
|
lzasitko wrote:Don't know what you guys were searching for but I found this in a couple minutes....
Plastic t molding was really common for all kinds of wood products and still widely available from places that supply that market.
TapeEase
They have widths to 1.5" and different colours and woodgrains
I guess you're just a genius with searching! Now that you've found 250 feet of T-molding (TapeEase minimum order), how about finding 9 feet? 
|
raisinkain
Everett
New Member
Joined: 06/16/2009
View Profile
Good Sam RV Club Member
Offline
|
Update...I talked with Susanne at west and barker. they now have the "bounder Biege" T-molding. It is PN 889 color Dawn Tide. 52.00 for 40 feet including shipping in case anyone has a need....thanks again for all the replies1 Larry
|
Moxy
Ontario, Canada
Full Member
Joined: 02/24/2008
View Profile
Offline
|
Lazy days had it last yar by the foot, pretty inexpensive if I recall, I am pretty sure RV GOD on ebay had it as well, I bought white for my 97 bounder
good luck
Moxy
|
raisinkain
Everett
New Member
Joined: 06/16/2009
View Profile
Good Sam RV Club Member
Offline
|
Wow!!! Thanks to all for the Info and great resource links. I did find what I need at West and Barker but as was mentioned may not get the right color but it beats chipped and jagged. Thanks Again Everyone!!
|
|
|
