Thank you, we contacted Nash and it's the normal configuration. Sticks out lower because of the position it is, to make it easier to get to. Looks like "operator error" on our part, not ensuring the tank valve was seated properly before use. But we're keeping an eye on it and yes, it's under warranty. Thank you as well for the Nash link.
“The world is a book and those who do not travel read only one page.”St. Augustine
2010 Nash 27 E
2005 Ford F-250 Superduty Triton V-10
Current Rig: 2011 Salem 29QBDS Towed with a 2011 Chevrolet Silverado 1500.
08 Jayco 30BHS, 02 Dutchmen 30FK, 77 Coachmen Leprechaun MMH
06 Ford F-350 Diesel 4x4,02 Dodge Ram 1500 4x4,01 Dodge Ram 1500 4x4, 94 Chevrolet Silverado 4x4
Has anyone with this model or simliar got any advice on a bent black water handle? When we bought the trailer and did our walk through, we just don't remember enough about the handle position to know if this is normal.
Just made our first trip and upon attempting to hookup to drain, got a bath...yeah...
The black water tank handle appears bent in a downward postion. Our gray tank handle is straight and close to the frame, this one is sticking out at least 3" further and bent downward, is that normal? Also can't feel any difference between open and closed. I would hate to think something is wrong so early with this trailer. I would like to include a picture but can't figure out how to upload to this site.