So I've been puttying staple holes and painting, adding some metal and wondering about my furnace.
I've also been to Phoenix and a few local towns doing this and that.... little time for Diddums, spring is here for a week then I'm back on
I may not add the furnace as it is heavy, adds 2 holes in the side and a lot of AMPS.
I have been looking at Wave 6's and think by next winter that will replace anything w/ batteries so why bother..... COMMENTS???
Also for wiring the clearance lights, any LEGAL problems with making them blink like turn signals and also have running lights?
What about the back red ones up high, can they be brake lights as well as rear running lights?
I'm adding a sliding seat up front and a pull out trash can next to the sink.
have the outside shower parts but having a ***** of a time finding the male ends for the propane disconnects, not sure why.
Tomorrow while in town I'll go by the propane dealer they usually have the most stuff.
The camera is......? somewhere after all the traveling, I'll catch up after some questions get answered!
Thanks
Repo
05 Tundra 4x4
1976' SIX PAC, cut to size and function.
$800 1977' Road Ranger, not yet road worthy (AUG '11')