I was reading and checking out all these installs again for more info and to make sure I did not miss anything.
Outstanding info, provides tons of Great Ideas/pictures of all the different installs from all over the country.
Doing the finishing touches to scale diagram, for MS MPPT CC, solar wire and other wiring routes to make sure everything fits, in the Electrical Bay of the TH, as I have very limited space in there, then the tools come out and the fun starts.
What else do I need?
Have the following on the bench, ready for the Solar install,
4-220W Canadian Panels,
Mounting feet/tilt brackets/legs for above,
MS 60A MPPT CC, battery gages, Battery temp gage,
Buss Bars for mounting PV solar wires,
100+' of #10 AWG wire,
Battery disconnect switch,
Crimping tools, Dielectic grease, Color coated heat shrink tapes, 2 types, Labels for all the wiring/cables (+clear heat shrink tape for covering labels),
Misc sizes of Stainless screws/bolts for mounting everything.
Anything else ???
2010 F-350,6.4PSD, 6spd man trans,CC,SWB,SRW, Caravan camper shell,50 gal bed tank,17,000lb Husky WD hitch,Northwoods 2008 28KS Desert Fox Toy Hauler,2005 Honda 500 Rubicon ATV w/rumble seat,1 Aussie waiting,watching and ridin shotgun on the whole outfit.