We have a heavy rocker-recliner behind the passenger seat. It is not bolted to the floor. It has a swivel hoop base which is round 3/4 or one inch steel tubing.
I went to www.glastop.com and saw a dandy chair clamp. Alas, they are out of stock and have no hopes of finding another supplier.
Can anyone direct me to a chair clamp, hopefully, with a release, so it can be moved. I will settle for a permanent clamp.
Guess I could buy a couple of heavy duty steel U-bolts and drill down into a compartment below and use a steel plate to secure the chair with lock washers and nuts.
RET ARMY 1980, DW Donna , "Tiny" (furkid) . Class A, 2007 Bounder 35E, Ford Chassis, 4 SAMS 6VOLTS,405W Solar,TriStar 45 Controller,1750W INVERTER, YAMAHA 2400, TOW: Honda CRV. READY BRAKE. "Living Our Dream". NASCAR FAN 14,18,20,11 LOVE CO & NM
We have a similar setup. Behind the passenger seat we replaced the barrel chair with a recliner. Behind that is the entry steps. I took a screw out of the metal molding, near the wall and put on an eye hook screw. We use a bungee around the legs to the eye hook.
May God bless your travels
Me, The Wonderful Wife
and two Spastic Border Collies U.S. Army Retired 2004 Coachmen Aurora, 3480DS 2007 Saturn Outlook, FROG
Winnebago provides a clamp with a knob that you turn to tighten it down. On mine the knob has a long bolt that goes through the floor and into the storage compartment below with a nut and washer on it.
You can probably get the part from Winnebago through Lichtsinn Motors LICHTSINN. They are a dealer a mile or so from the factory.
If you call Lichtsinn have your VIN handy. They can cross it to your ID number so they will know which parts are on your coach.the clamp can be obtained from Lichtsinn Motors.
Clay (WA5NMR), Lee (Wife), Katie (cat).
Full Timing in a 2004 Winnebago Sightseer 35N, Workhorse chassis, Honda Accord toad
For a modification to the pipe clamp idea. They should have a bolt stud with lag screw threads on one end and regular 1/4-20 on the other. You can anchor the lag end into the floor and place a pipe hangar on it then a large plastic handled wing nut to hold it in place.
2012 Chevy 3500HD Dually 4X4
Crew Cab long bed 6.0 gasser 4.10
06 Hitchiker II LS 29.5 FKTS
Yamaha EF3000iSE
retired gadgetman
I'd suggest using a couple blind nuts mounted below the floor in the basement compartment. Then a couple 3/8" wing bolts long enough to go through the base ring of the chair, the floor and into the blind nuts. Simply insert the pair of bolts and tighten securely before moving down the road.
hershey - albuquerque, nm Someday Finally Got Here
My wife does all the driving - I just get to hold the steering wheel.
Superman was an illegal alien.
Expedition - Suzuki Grand Viagra
Offline
. Class A, 2007 Bounder 35E, Ford Chassis, 4 SAMS 6VOLTS,405W Solar,TriStar 45 Controller,1750W INVERTER, YAMAHA 2400, TOW: Honda CRV. READY BRAKE. "Living Our Dream". NASCAR FAN 14,18,20,11 LOVE CO & NM
.jpg)
Online
