Are there any tips how to keep the square plastic "magnifier" to stay in the rear window of my class c? I'v tried cleaning the window, wetting it and the plastic square pressing it in place per the directiioons on the packaga, but it falls off before very many days. I'v tried using clear packing tape around the edges but the heat loosens the tape and the square falls off again.
thanks for any tips.
Use some 0000 four ought steel wool to clean the window with. Use it dry and polish the glass very clean. Then use a little moisture on a paper towell to stick it. Be sure to clean the plast piece too.
Never had one fall off the window. I just clean the window, wet the window and magnifier and apply to the inside, then work the air bubbles out. They do get a bit milky after a few years, so I'm now on the third one.
Stupid question - you are applying the SMOOTH side of the magnifier to the INSIDE of the window, right?