TugCE

Leesburg, Florida

Senior Member

Joined: 06/10/2008

View Profile


Offline
|
Pictures are always welcome. I hope that you can get your project finished soon. I am really looking forward to seeing the finished product.
I am a Retired U.S. Merchant Marine Chief Engineer
05 Chevy 2500 4x4 D/A with Helper Springs and Air Ride Air Bags
06 R-Vision RW3360 Fifth Wheel Toy Hauler
97 FLTCI converted into a Roadsmith Trike by The Trike Shop of Daytona
|
whisperide

Golden Spike area

Senior Member

Joined: 09/27/2011

View Profile

Offline
|
Thanks! Today is putting the "new" oil pan on the engine, I want this car running, I want to test the hitches before tying them in to a custom roll-cage. I have trailers lined up, friend-of-a-friend deals, but since I'm not taking them anywhere far, no problems.
My deadline is still the Cruise-In on July 7.
'06 GMC C2500HD RCLB gasser 4.10:1, 4L80E, custom camshaft
'84 Trans Am 6.2 diesel, 700R-4, custom Class-3 receiver
'69 F350 dually. GM 6.2 diesel, turbo, 700R-4, NP208 all pending.
|
whisperide

Golden Spike area

Senior Member

Joined: 09/27/2011

View Profile

Offline
|
Lunch break. Getting the engine out to install the pan, already smashed my right thumb.


|
rav

Northern Indiana

Senior Member

Joined: 06/14/2006

View Profile


Good Sam RV Club Member
Offline
|
TugCE wrote: Pictures are always welcome. I hope that you can get your project finished soon. I am really looking forward to seeing the finished product.
X2 really been enjoying the progress
2007 Chevy 2500HD Crew Cab
2005 Bounder 38N
|
whisperide

Golden Spike area

Senior Member

Joined: 09/27/2011

View Profile

Offline
|
Thanks! Encouraging words are always welcome, and helpful. Though I intend to see this through even if the whole world hates on it.
Tomorrow I'll have the pan installed, gotta get the oil cooler lines away from the car's steering shaft. Plenty of space if I can bend them up. Also gotta hammer the firewall for clearance where they're now kissing.
If that goes well enough, I should have the known-good engine and a known-good transmission final-installed tomorrow afternoon. I got 2 gallons of Gatorade, just to be sure I don't get faint.
Tuesday should see the gas tank final-installed.
|
|
|
Crazy Cooter

Redding, CA

Senior Member

Joined: 03/18/2005

View Profile

Offline
|
I have been loving the build!
I forwarded a link to a buddy of mine who loves Firechickens just to burn him a little.....
We haven't even seen any weight nazi's here yet.........you know even though you installed the correct parts....you wont be safe of legal to tow anything heavier than a jet ski olleyes
Tony KI6WAO
2006 Dodge Ram 3500 DRW
1992 Jeep Wrangler YJ
2012 Cyclone 300C
2013 Can Am Maverick X-RS
2006 KTM 525 EXC CA Plated
2008 KTM 525 XC ATV
2008 Polaris 525 IRS
2007 Kawasaki STX12F
2009 Kawasaki 260X
|
whisperide

Golden Spike area

Senior Member

Joined: 09/27/2011

View Profile

Offline
|
Ratings are not law, and in fact, uprating is legal. I checked with my DMV, my DPS, my DOT, my UHP, and my local police.
As soon as I finish this bowl of cereal, I'm out to make progress on this car.
|
whisperide

Golden Spike area

Senior Member

Joined: 09/27/2011

View Profile

Offline
|
It's in! Pics next. Right now I'm hurting, exhausted, hungry and hurting.
But the wiper motor is in, the air cleaner is on, I had to tweak the bracket for the "tuna cam", and I had to modify the under-hood braces, but the hood closes!
I got the radiator in, and both batteries. The starter is on. The crank and water pump pulleys are back on, the alt belt is on and tight. The P/S pulley is a good 1/8" from the steering box.
|
whisperide

Golden Spike area

Senior Member

Joined: 09/27/2011

View Profile

Offline
|

|
whisperide

Golden Spike area

Senior Member

Joined: 09/27/2011

View Profile

Offline
|


|
|
|