We put the Denman's on our trailer this year. We made it 4 years and who knows how many miles with the General AmeriTrailer tires with no problems. We couldn't afford to upgrade to the 16" wheels this time around so I did research and really liked what I found about the Denman 225/75-15 E load range (2830lbs) at max 80psi. We shall see how these do.....
I have an 06 Raptor 3814, and all six of my Carlisle D's delaminated on the way back from Utah last September... not all at once, but before I got back to Reno, I had six brand new tires.
Unfortunately, the only "better" tire I could get was also Carlisle... at leats they're E-rated radials.
I'm thinking of selling off these wheels/tires on Craigslist or something and going with the XPS Ribs on 16's. Just have to make sure I have the $$.
I have first hand experience that no matter what E rated tire you put on the first thing to go is a metal/ rubber valve stem. When this happens the tire will loose air and then disentigrate from the inside out.
ALWAYS RUN THE FULL METAL VALVE STEMS!!!!
2002 Jayco Talon ZX 28STM
2004 Ford F250 Lariet 4x4 CC 6.0 PSD
Offline
