hasheel

Durham,NC

Full Member

Joined: 01/10/2004

View Profile

Offline
|
I need to tack down the wire from my XM antenna on the roof of my 2008 Tioga ranger. Any ideas as to what to use?
Thanks in advance
2008 Tioga Ranger 31 W
02 Suzuki XL-7 toad
BrakeBuddy
|
donn0128

Pronounced Ore-gun

Senior Member

Joined: 04/21/2005

View Profile

Offline
|
Dicor lap seal. Lay the wire where you want it and gob on a bunch of Dicor and it will stay there for a long time.
Donn
|
Jim4455

Wherever I choose

Senior Member

Joined: 11/22/2006

View Profile

Offline
|
I haven't done this although I should. Why not use common silicon adhesive. This would have been my choice.
1993 Winnebago Vectra 33' 454 Chevy
2002 Saturn LW200
Blue Ox hookup
|
donn0128

Pronounced Ore-gun

Senior Member

Joined: 04/21/2005

View Profile

Offline
|
If you have a rubber roof, the use of silicone will damage the membrane and void your warranty in about 30 seconds. Go to the Dicor web site and read the warranty information. Besides, silicone will not stick to the rubber roofing material.
|
RonNN

Wisconsin

New Member

Joined: 10/31/2007

View Profile

Offline
|
One small piece of Eternabond will hold that wire for a lifetime.
|
|
|
tvman44

Southwest Louisiana

Senior Member

Joined: 09/25/2007

View Profile

Offline
|
Eternabond or Dicor should do the job.
Papa Bob
1* DW "Granny"
1* 2008 Brookside Sunnybrook 32'
1* 2002 F250 Super Duty 7.3L PSD
Husky 16K hitch, Tekonsha P3,
Firestone Ride Rite Air Springs, Trailair Equa-Flex, Champion C46540
"A bad day camping is better than a good day at work!"
|