shadows4
Kansas City, Mo
Senior Member
Joined: 04/15/2006
View Profile
 Offline
|
I have the standard DC version and love it. I don't see how the HP DC version would work any better. The standard DC would be the least expensive way to go. Good luck, John.
2000 4X4 Excursion Limited 6.8V10, 4.30, 121,000 miles
Hellwig Rear Sway Bar
Roadmaster Active Suspension
2004 4X4 Expedition 5.4V8, 3.73 208,000 miles
2000 Coachmen 297 RKS
Reese Dual Cam Sway Control
Prodigy Brake Control
|
Kenneth
Washington, the state
Senior Member
Joined: 03/20/2001
View Profile
Offline
|
The conversion kit is #26000 for 4" or 5" deep tongue frames and #26001 for 6" frames. It supply the saddles that bolt to straight bars which mate with the cams. You do not need the saddle-end bars. About $190 these days.
The only possible fly in the ointment is that the kit above has the U-bolts which slip over the frame. There are sometimes interferences which must be dealt with. This is usually not a huge problem. the complete new hitch in the Strait-Line or HP version does not use U-bolts. Your money, your choice.
By the way, Reese, Draw-Tite, and Hidden Hitch are all the same products. Buy where you get the best service and price.
I'm free of prostate cancer for 5 years now.
All men over age 50 should get an annual PSA blood test. Mine had a low reading, but the yearly jump was significant. The biopsy showed cancer just entering the aggressive stage. Dr. Hackenslash removed it.
|
skipnchar
Topeka Kansas USA
Senior Member
Joined: 12/17/2003
View Profile
|
They're both pretty good but remember the Equalizer is another friction based system. DC uses the spring bars resistance to stiffen the connection only when it's straight instead of at all angles like friction systems do. You can save a few bucks by converting your present system to the DC which MAY just about make the price of the two equal. Generally speaking the Equalizer is a fair amount less costly though. Good luck / Skip
2004 F-150 HD 3,050 lb. payload
Rockwood 8314SS 34' travel trailer
We have enough YOUTH...how about a fountain of SMART
|
JIH
Albuquerque NM
Full Member
Joined: 09/30/2007
View Profile
Offline
|
The one that I own is the best by far!!!!!
|
BillB800si
S.E. MICHIGAN
Senior Member
Joined: 01/09/2006
View Profile
Offline
|
downtheroad wrote:The argument that they are both very good and are both superior to a friction bar is TRUE.
The standard argument that Equal-i-zer is "easier to hook up" is simply NOT TRUE.
--------------
I've had both systems and the Equalizer Equalizer is much easier to hook up.
I now don't need any tools to hook up or unhook. The bars slip right on to the L-Brackets and I just slip the L-Pins on and I'm done with it. No need to have a tool to tighten anything up with now. They slip on they slip off.
Bill B. (Michigan)
2007 Dodge Ram 2500 MegaCab CTD
2007 Jayco Eagle TT Model 322FKS
|
|
|
downtheroad
Tumbling Waters, Washington
Senior Member
Joined: 02/18/2003
View Profile
|
BillB800si wrote:
I've had both systems and the Equalizer Equalizer is much easier to hook up.
I now don't need any tools to hook up or unhook. The bars slip right on to the L-Brackets and I just slip the L-Pins on and I'm done with it. No need to have a tool to tighten anything up with now. They slip on they slip off.
Now I am completely confused..
What dual cam did you have? I have never used any "tools to tighten anything up with" when I hook up my dual cam.
Help me out with this one...maybe I am doing something wrong.
GMC Duramax/Allison (LBZ)
08 Komfort 277TS Our Rig Pic
Reese Dual Cam HP
|
dodge guy
Chicago, western subs.
Senior Member
Joined: 03/23/2004
View Profile
Offline
|
I agree with skipnchar, the EQ is a glorified friction based sway control! the DC will want to center the trailer whereas a friction sway control will want to try and keep it at whatever angle it`s at.
And as far as hooking up is concerned, I don`t need no tools either. just lift the truck and trailer together (easier now with the power tongue jack), and hook up the WD bars to the DC, then retract the jack. just as easy as the EQ.
Wife kim
Son brandon 7yrs
Daughter marissa 6yrs
Dog shadow
07 Cherokee 32B
02 Excursion 4X4 V-10 4.30 gear
Reese HP dualcam,Prodigy brake controller,
Air lift air bags.
Better to have a bad day of
camping than a good day at work!
|
mooreadventures
North Carolina
Senior Member
Joined: 03/22/2004
View Profile
|
I went thru the same delimma a few years back and choose the Equalizer for 2 big reasons.
1. We hope to get a Keystone VR-1 in the next couple of years and the Equailzer is the only WD that can be used because they build living space out on the A-Frame. No room to use a lift bar for the chains.
2. I was impressed with the fact that you can hitch up at any angle witht he Equalizer. I used a 'chain' style WD hitch before and found it to be a PIB when trying to hitch at some angles. I usually had to hook up, pullout and strighten up before I could attach the bars. Not the case with the Equalizer - I haven't found a single incident where I had problems hooking up.
I'm not saying the the Reese is a bad product by any means - it is a great product. I also believe that mechanically, both are comperable. I just found things that I liked about the Equalizer better.
It's kind of like Coke and Pepsi... drink whatever tastes best to you.
Mark & Tammy
'01 Excursion Limited, 4x4, V10, RoadMaster Active Suspension
'01 Prowler 31G
Equal-i-zer Hitch - Prodigy Brake Controller
|
BillB800si
S.E. MICHIGAN
Senior Member
Joined: 01/09/2006
View Profile
Offline
|
Now I am completely confused..
What dual cam did you have? I have never used any "tools to tighten anything up with" when I hook up my dual cam.
Help me out with this one...maybe I am doing something wrong.
-------------
When you pull the torsion bar up via the chains you need a pipe to engage the snap up bracket.
We don't need any tools with the Equalizer. Except of course my hands to guide the bars onto the L-Brackets.
Happy trails,
|
rhondavid
Birmingham, Al
Senior Member
Joined: 07/01/2003
View Profile
Offline
|
No tools needed on the Dual Cam, not even a pipe if you want to call that a tool. Hitch it up, raise the front of the trailer with tongue jack which will raise back of TV as well, put chains in place and can move the pullup mechanism by hand. I have never used a cheater bar to do this.
Hook up at angles, makes no difference with the Dual Cam either. Go through the same procedure as if TT and TV are straight in line. Never had issues with this either.
Love my Dual Cam, easy to hook-up - un-hook, does a great job of eliminating sway - not controlling it. TV and TT manuver as one while under way. Many miles of happy towing. Never once felt like I was out of control.
David,Wife,4 kids,SIL,1 grandchild
2003 Ford Excursion Eddie Bauer 7.3 PSD w/3.73 rear end
Jayco Kiwi Too 30T bunkhouse w/triple bunks
Prodigy Controller
Reese Dual Cam HP
Michelin LTX M/S
2001 F150 SuperCrew
Topsail Hill Cult Member
|
|
|
