donee
Simi Valley, Ca. 93063
Senior Member
Joined: 03/05/2006
View Profile
 Offline
|
I was wondering if anyone on here has installed at least a tranny temp gauge on their Class C? If so, what brand did you use?
Or what other gauges?
Considering the weight these carry, IMHO, it would be worth having one.
Thanks.
05 Monaco Esquire 29PBD
05 Silver Dodge Cummins w/3.73 gears 4 spd auto.
|
trnfla
Tampa
Senior Member
Joined: 06/17/2006
View Profile
Offline
|
I believe a number of people use these Scangauge II
I cannot wait until I can get one.
Have a great time camping,
Terry
Please visit my Photos and Blog NiceCamps.com
New (2 me) 2004 Winnie 31C
2006 Expedition EB, replaced by scooter and 2008 Mazda 3
Had 2007 Zeppelin EZ190, Prodigy, Equalizer
|
Cool Mike
Mendocino. Calif.
Senior Member
Joined: 06/24/2006
View Profile
Offline
|
The Scangauge II would be the thing, depending on what your driving. If it has the OBT 2 plug under the dash at the steering wheel. Install takes 2 min.
2001 27' Four Winds Class-C E-450 V-10.
Buick Park Ave Ultra, Ford Ranger PU, JD 500 backhoe.
1941 Farm All "A"
|
donee
Simi Valley, Ca. 93063
Senior Member
Joined: 03/05/2006
View Profile
Offline
|
I totally forgot about the Scanguage.
Thats what I was looking for.
Thanks.
|
trnfla
Tampa
Senior Member
Joined: 06/17/2006
View Profile
Offline
|
Your welcome... Thats what these forums are for...
|
|
|
PapPappy
Wilmington, NC
Senior Member
Joined: 12/23/2007
View Profile
Offline
|
Just ordered mine, and DW says it has arrived at the house...can't wait to get home and try it.
Bill
DH Bill / DW Claudia / DD Jenn / DS Chris
The Paps! Sophie, Abby, Brandy, Kahlie and Annie 
2000 Winnebago "Minnie" 31C, Ford V-10
Purchased April Fools Day, 2008 
The Pets
|
Dusty R
Charlotte Michigan 48813
Senior Member
Joined: 04/05/2003
View Profile
Offline
|
I have one of the earlier scangauge. I needed replace a relay, so I had to unhook the batteries, when I rehooked them the words are gone, the numbers are there but not the letters. I haven't tried to figure out how come yet. Any ideas what to look for.
|
donee
Simi Valley, Ca. 93063
Senior Member
Joined: 03/05/2006
View Profile
Offline
|
Did you disconnect the scangauge?
It may be possible that something shorted out when the batteries were reconnected.
|
visch1
CAPE COD, MA
New Member
Joined: 05/04/2008
View Profile
|
Someplace in the manual that comes with it describes how to RESET the unit to default. It took me awhile as I'm one who thinks "reading the directions is admitting defeat" 
|
