trail-explorer
WA
New Member
Joined: 07/31/2008
View Profile
 Offline
|
jackxclan wrote:D you need 3 lights mounted in the center. Like anyone's ever gonna check.
mentioned earlier, the lights can be 3 separate lights, or a 3 light unit - something like this:
red of course for the back:
red LED ID light bar
|
derwud
Pasadena, CA
Senior Member
Joined: 08/10/2003
View Profile
Offline
|
$18.00 from Benlo RV
* This post was
edited 07/31/08 08:16am by derwud *
2005 Nissan Titan CC SE 4x4, 2006 Weekend Warrior FS2300
2 Quads, 2 Motorcycle and a '06 Rhino
1 Patient Wife, 1 Crazy child, 1 sweet baby.
RIP Bubba and Toby, we love you.
|
Rhinojoe
Inland Empire
Full Member
Joined: 07/06/2007
View Profile
|
mapguy wrote:carringb wrote:The conspicuity tape you added meets the reflector requirements. Essentially, the rear must have a red facing reflector on each side visible from 500'. The tape will meet that requirement. The reflectors don't have to be part of the taillight.
Bryan and others -
Might want to look closely here -if you want to fully meet FMVSS 108 standards -especially if you have a > 30' length trailer that is > 80" wide and or > 10,000 lb GVWR.
You need all 12 items as stated in the link posted above
Link above again
We just bought a Ragen FA3005 and it doesn't actually meet the FMVSS 108 standards   So will be contacting Ragen concerning this issue and a couple of others.
Map Guy
I flush mounted an LED turn signal right in front of the steps of my FA3005. It makes those knuckleheads that drive in your blind stop take notice. PM me your email and I'll shoot you a pic.
|
KaseyKahneFan
Oregon Coast
New Member
Joined: 06/28/2008
View Profile
Offline
|
Can you post the picture here? We would all like to see. Thanks !
2008 GMC 2500HD Duramax Allison 4x4 Crewcab
2008 Sandstorm F40SPTS 5er
2006 North River Seahawk 21'
|
mapguy
Puget Sound
Senior Member
Joined: 09/02/2007
View Profile
Offline
|
Rhinojoe wrote:mapguy wrote:carringb wrote:The conspicuity tape you added meets the reflector requirements. Essentially, the rear must have a red facing reflector on each side visible from 500'. The tape will meet that requirement. The reflectors don't have to be part of the taillight.
Bryan and others -
Might want to look closely here -if you want to fully meet FMVSS 108 standards -especially if you have a > 30' length trailer that is > 80" wide and or > 10,000 lb GVWR.
You need all 12 items as stated in the link posted above
Link above again
We just bought a Ragen FA3005 and it doesn't actually meet the FMVSS 108 standards So will be contacting Ragen concerning this issue and a couple of others.
Map Guy
I flush mounted an LED turn signal right in front of the steps of my FA3005. It makes those knuckleheads that drive in your blind stop take notice. PM me your email and I'll shoot you a pic.
Hey Rhinojoe PM is blocked add me to the list
Map Guy
* This post was
edited 08/01/08 12:51pm by mapguy *
|
|
|
Rhinojoe
Inland Empire
Full Member
Joined: 07/06/2007
View Profile
|
I checked and I got this????
"You have no blocked members."
Mods can you help?
|
Rhinojoe
Inland Empire
Full Member
Joined: 07/06/2007
View Profile
|
KaseyKahneFan wrote:Can you post the picture here? We would all like to see. Thanks !
It won't let me post pics.
|
mapguy
Puget Sound
Senior Member
Joined: 09/02/2007
View Profile
Offline
|
Rhinojoe wrote:I checked and I got this????
"You have no blocked members."
Mods can you help?
Need to add me to your "Buddy List". I should of been more specific 
Map Guy
|
