RV.Net Open Roads Forum: Tech Issues: Annode Rod question

RV Blog

  |  

RV Sales

  |  

Campgrounds

  |  

RV Parks

  |  

RV Club

  |  

RV Buyers Guide

  |  

Roadside Assistance

  |  

Extended Service Plan

  |  

RV Travel Assistance

  |  

RV Credit Card

  |  

RV Loans

Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Help and Support  |  Contact

Search:   Advanced Search

Search only in Tech Issues

Open Roads Forum  >  Tech Issues

 > Annode Rod question

This Topic Is Closed  |  Print Topic  |  Post New Topic  | 
Page of 2  
Prev
Sponsored By:
Fishinghat

Western Washington, USA

Senior Member

Joined: 10/03/2002

View Profile


Offline
Posted: 05/06/12 01:05pm Link  |  Print  |  Notify Moderator

Old-Biscuit wrote:



Also very good advice, but possibly a little misleading.

Cathoid or sacraficial rods have impurities that are left behind, so when the rod is "half" gone, it could be next to useless. It would be prudent to replace the rod anytime you notice significant deterioration. They are not that expensive, and a whole lot cheaper than a new water heater.


Holiday Rambler Navigator DP, Hummer, and Honda VT1100C Shadow


surgtech56

michigan

Full Member

Joined: 08/06/2011

View Profile


Offline
Posted: 05/06/12 02:43pm Link  |  Print  |  Notify Moderator

I definitely jumped the gun on replacing it, it looks like the 25%. Like one of the posters said, I'll keep the old one, just in case. I paid $14 at a local RV dealer. I can't tell you how much I appreciate this forum. I subscribe to other forums(non-RV type) and this by far is the most educational, helpful and friendly.

mlts22

Austin, Texas

Senior Member

Joined: 11/15/2010

View Profile



Posted: 05/06/12 03:31pm Link  |  Print  |  Notify Moderator

The $15 from Amazon for an anode rod is definitely cheaper than a complete water heater replacement.

This is assuming a Suburban water heater. If one has an Atwood model, it has a different design, so no need for one.

Just make SURE to use either Teflon tape or pipe goop designed for potable water systems on the threads. Else, they will corrode-weld into place.

nm1oqrz

Trumbull CT

Full Member

Joined: 10/20/2010

View Profile





Offline
Posted: 05/06/12 06:41pm Link  |  Print  |  Notify Moderator

Hello. Remember that an Atwood water heater should NOT have an anode rod installed. Atwood will not authorize warrantee work on one of their water heaters that has an anode rod installed.
Happy camping nm1oqrz

This Topic Is Closed  |  Print Topic  |  Post New Topic  | 
Page of 2  
Prev

Open Roads Forum  >  Tech Issues

 > Annode Rod question
Search:   Advanced Search

Search only in Tech Issues


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:

© 2013 RV.Net | Terms & Conditions | PRIVACY POLICY | YOUR PRIVACY RIGHTS