
	Already a member? Login here. If not, Register Today! \| Help

Newest | Active | Popular | RVing FAQ

Forum Rules | Forum Help and Support | Contact

Open Roads Forum > Class A Motorhomes > Maintenance Issues & Tips

Reply to Topic | Subscribe | Print Topic | Post New Topic |

Sponsored By:

rolling 7

Florida

New Member

Joined: 11/27/2006

View Profile

Good Sam RV Club Member

Offline

Posted: 06/17/12 06:13am

Link | Quote | Print | Notify Moderator

WE bought a 1994 Fleetwood South winds Class A Motore home. The rear clearance lights are no good rusted and falling apart. From what I can see is thay are screwed on from the inside of the coache. the ones I bought are LED. How can I get the old ones off, because I do not see any screws on the inside any place? Also the new one have one wire and thay need to be grounded.

RV Trax

Panama City Beach

New Member

Joined: 04/08/2009

View Profile

Offline

Posted: 06/22/12 11:22am

Link | Quote | Print | Notify Moderator

Some clearance lights are riveted or it will have screws under the lens. There should be no screws hidden from the back side.

rgatijnet1

Florida

Senior Member

Joined: 06/22/2009

View Profile

Good Sam RV Club Member

Posted: 06/22/12 11:24am

Link | Quote | Print | Notify Moderator

The LED clearance lights that I have seen can be ordered with one or two wires. You need the two wire lights.

Weathertodd221

Senior Member

Joined: 12/03/2009

View Profile

Offline

Posted: 06/22/12 11:54am

Link | Quote | Print | Notify Moderator

5 in 1 or plastic chisel. Might be glued on if there are no screws.
Do yourself a giant favor and insure the light is properly waterproofed. Seen a few coaches take water in from leaky running lights on the front/rear.