mikeleblanc413
Sour Lake, Texas
Senior Member
Joined: 07/17/2010
View Profile
 Offline
|
Am gathering pricing information on Eternabond and would like to know if anyone has used an alternative product that they have been pleased with? There seem to be several out there. I have a higher degree of trust from this forum. Eternabond seems to have an excellent reputation. An alternative high quality product at lower cost would be beneficial. THANKS!!!
Mike LeBlanc, "The Digital Guy"
Professional Photographer, Retired Art Educator
Sour Lake, Texas
"Digital Guy"
Facebook
Flicker
|
michaelman501
langley
Full Member
Joined: 05/15/2012
View Profile
Offline
|
I am not sure where you have gathered your pricing from for Eternabond ? I have yet to come across an alternative to Eternabond, with something like this you get what you pay for quality wise...I am not sure if you have shopped on Amazon but you can get a 37' long roll of 4" wide roll of Eternabond for 67$ shipped....I think its relatively cheap considering it will waterproof all the seams on your unit! Maybe others can chime in if there is an alternative ?
|
gbopp
The Keystone State
Senior Member
Joined: 08/03/2008
View Profile
Offline
|
One product that is similar to Eternabond is Seal-Fast Tape.
I've never used it and I don't know the price compared to Eternabond.
I'll continue to use Eternabond, I know it works.
|
Gale Hawkins
Murray, KY
Senior Member
Joined: 07/22/2007
View Profile
Offline
|
The cost of the produce for once in a lifetime application is not a concern especially when there is no known equal. 2X on what others have said.
|
harold1946
Surprise Arizona
Senior Member
Joined: 06/20/2009
View Profile
Offline
|
Dicor tape and Dura-Bond are two others, but there is not much price difference.
Harold and Linda
2009 CT Coachworks siena 35V
W-22 Workhorse 8.1L
Explorer toad
|
|
|
mikeleblanc413
Sour Lake, Texas
Senior Member
Joined: 07/17/2010
View Profile
Offline
|
Today I ordered 2 50 ft rolls of 4 inch from Roofing Supply USA which comes up to the website bigrocksupply.com. My total cost, including shipping, was $115.00.
I'm certainly looking forward to this project. Thanks to everyone who supplied tips and information.
Have a GREAT week-end!!!
|
magik235
Central Wisconsin
Full Member
Joined: 11/22/2011
View Profile
Offline
|
1985 Sport Coach http://www.rv.net/forum/index.cfm/fuseac........d/tid/26101292/srt/pa/pging/1/page/1.cfm
|
2doghome
Texas
New Member
Joined: 04/23/2012
View Profile
|
Found this how to video on the durabond site, looks like the way I will go-
http://www.eternabond.com/articles.asp?id=186
2001 Minnie Winnie
Class C 450 V10 ford,
31ft, one slide
|
hotbyte
Barnesville GA
Senior Member
Joined: 08/31/2004
View Profile
|
Seems to have a grep reputation here but video makes it look too easy  I need to do put some attention to our roof and might give the eternabond a try.
Our Web Albums Temporary Web Albums
2006 Yellowstone SE, 1998 Dodge Durango SLT 5.2L and 2011 Tidewater 1900 Bay Max
|
magik235
Central Wisconsin
Full Member
Joined: 11/22/2011
View Profile
Offline
|
hotbyte wrote:Seems to have a grep reputation here but video makes it look too easy I need to do put some attention to our roof and might give the eternabond a try.
It is almost that easy. Cutting it when it is warm is a little harder than in the video because the scissors gums up after multiple cuts but nothing too serious. Getting the protective film off takes a little practice. I put down a test piece to remove later and it had excellent adhesion.
|
|
|
