RV.Net Open Roads Forum: Search

RV Blog

  |  

RV Sales

  |  

Campgrounds

  |  

RV Parks

  |  

RV Club

  |  

RV Buyers Guide

  |  

Roadside Assistance

  |  

Extended Service Plan

  |  

RV Travel Assistance

  |  

RV Credit Card

  |  

RV Loans

Open Roads Forum Already a member? Login here.   If not, Register Today!  |  Help

Newest  |  Active  |  Popular  |  RVing FAQ Forum Rules  |  Forum Posting Help and Support  |  Contact  



Open Roads Forum  >  Search the Forums

 > Your search for posts made by '12th Man Fan' found 31 matches.

Sort by:    Search within results:
Page of 2  
Prev
  Subject Author Date Posted Forum
RE: Hehr Window Repair

Might check with a local glass company. Some of them are capable of fixing RV windows.
12th Man Fan 03/22/21 06:31pm Class A Motorhomes
RE: Exterior/Interior coatings on new travel trailers

In 2005 I paid for the exterior coating on my new all white RV. After a few years it had turned darker. I had to hand rub the whole RV with simple green to remove it. I would not recommend the coatings.
12th Man Fan 03/09/21 07:28am Travel Trailers
RE: Chevy Shake

Not sure if it is the same issue but I had a 2009 GMC dmax dually and it had a vibration when starting off. There was a GM service bulletin on this issue that was caused by the driveshaft angle. I took mine to the dealer and they fixed it no problems afterward traded it in in 2014.
12th Man Fan 03/05/21 12:09pm Tow Vehicles
RE: Slide outs in cold weather

If you use your furnace and you have floor ducts you will need to leave the slides out if the slides cover the vents.
12th Man Fan 02/13/21 06:45am General RVing Issues
RE: Bathroom heater vent not blowing

I would suspect it has come loose or is kinked in the basement where it comes off of the distribution box. The bathroom is usually on a individual duct and if yours was built like mine was it probably needs some attention with some duct tape to close up all of the leaks. Good luck
12th Man Fan 01/30/21 10:10am Fifth-Wheels
RE: Superglide Hitch / Capture Plate Question

Well you have had two people say no so I would suggest you listen to them but the capture plate from your son's rig should fit if it is not bolted down. Good luck I would not want my advice to cause a problem. You could chain the slider to the front of the mount where it would not be able to move. That would also be a option.
12th Man Fan 01/03/21 05:50pm Towing
RE: Superglide Hitch / Capture Plate Question

Unless they have changed the design in the last 10 years I don't think it would be a problem. Without a capture plate it will not slide back so you would have to be very careful if backing at a sharp angle. On the newer models the plate is very easy to remove and replace so if one is handy just use it, if not just be careful backing.
12th Man Fan 01/03/21 05:23pm Towing
RE: Cannot open grey or black tank

If the valves are cable operated I don't know of any way without exposing the valves. If they are just a straight rod, if you can get a pair of channel locks around the rod and turn it back and forth as someone pulls on the handle it might open. Depends if it is stuck at the valve or there is some corrosion on the rod and handle. Good luck, wish we could help more.
12th Man Fan 12/25/20 12:35pm Travel Trailers
RE: splicing aluminum to copper elec wire

Are you sure it's aluminum? That would be highly unusual. It's probably tin plated copper. Thanks everyone for your input. I am kind of anal when it come to stuff like this. I looked at the wire closely and it sure looks like aluminum but on the wire I found AWM style 3321 which is tin plated copper so I don't have the problem I thought I had. The oven is at my home and it is a built in oven. There is a very heavy three conductor wire sticking out of the wall and that is how the old oven has been hooked up for 35 years so I guess going back the same way will be OK now that I know it is not aluminum. Thanks everyone for taking the time to respond. There is a wealth of knowledge available on the site and you are willing to help. This is why I asked the question here. The oven came wit an armored pigtail with 12 ga wire and it was not intended to be changed. Thanks again
12th Man Fan 12/14/20 10:37am Tech Issues
splicing aluminum to copper elec wire

I just bought a new oven and it came with aluminum wire and I have to splice it to copper. Do I need to do something different for this connection? I know aluminum and copper doesn't play well together in some instances. Thanks in advance for the you help.
12th Man Fan 12/13/20 06:57pm Tech Issues
RE: Light Problem

Not trying to be a wise guy but did you check the bulbs. When I got my RV both bulbs were burned out.
12th Man Fan 12/12/20 03:29pm Travel Trailers
Sort by:    Search within results:
Page of 2  
Prev


New posts No new posts
Closed, new posts Closed, no new posts
Moved, new posts Moved, no new posts

Adjust text size:




© 2021 CWI, Inc. © 2021 Good Sam Enterprises, LLC. All Rights Reserved.