| |
Subject |
Author |
Date Posted |
Forum
|
 |
RE: Transfer Switch
if transfer switch goes bad it should default to generator therefore you should have power when gen. is running. been there done that.
|
ADAD437
|
10/30/19 04:33am |
Tech Issues
|
|
RE: What are the two taps in my kitchen ?
i would bet on filtered water, i have the same setup in my dolphin.
|
ADAD437
|
10/23/19 05:29pm |
Tech Issues
|
|
RE: Cummins/Onan Air Filter Removal
i have the same problem on a 2011 freelander/w 4000, found if you work with it you will find a sweet spot where it will come out. patience.
|
ADAD437
|
10/11/19 08:39am |
Tech Issues
|
|
RE: No access to forum topics??
still don't work for me.
|
ADAD437
|
10/08/19 08:57am |
Forum Posting Help and Support
|
|
RE: Snowbirds?
i can't get it either, i tried the f5 and refresh both but no luck.
|
ADAD437
|
10/06/19 05:27am |
Forum Posting Help and Support
|
|
RE: 4000 Onan Microquiet immediate shutdown
The 3 flashes is just a code indicating there's a problem. I forget how to retrieve the actual problem code but if you get your owner's manual out and study it, you're find the way to get them to flash. The error code will be two different flashes back to back and then repeating after a slight pause. Once you've got that code and let us know what it is, we can give better advice on what to do to fix the problem. My generator acted like that because the RPMs were just a little high causing the Hz to be too high.
i think after the three flashes you push the stop again and it gives you the second number. mine is flashing 36 but i have not had time to fix it. any ideas?
|
ADAD437
|
10/05/19 04:08am |
Tech Issues
|
|
RE: Dinette removal
my guess would be if they are on the slide you would have to run the slide out and they will be under the slide floor. jmho
|
ADAD437
|
10/02/19 12:37am |
Do It Yourself Modifications and Upgrades (DIY)
|
|
RE: Florida
what happened to the op?
|
ADAD437
|
09/28/19 11:01am |
RV Parks, Campgrounds and Attractions
|
|
RE: Florida
did you check any of these out?
|
ADAD437
|
09/26/19 04:45am |
RV Parks, Campgrounds and Attractions
|
|
RE: Florida
go on 15 miles farther north to old town and check out suwannee river hideaway. nice secluded park on the famous suwannee river.campground
|
ADAD437
|
09/23/19 09:13am |
RV Parks, Campgrounds and Attractions
|
|
RE: Wierd Marks Appearing On Tires
looks like something is rubbing the tire when loaded.
|
ADAD437
|
09/22/19 05:01am |
Tow Vehicles
|
|
RE: South Dakota Advice
don't miss the buffalo round up at custer state park, do not know the date off hand but real close to your date's.
|
ADAD437
|
09/16/19 04:42am |
RV Parks, Campgrounds and Attractions
|
|
RE: My Onan Generator is Vexing me!
That’s a really good idea. I’ll try that tomorrow. It’s just really bizarre that it’ll fire back up immediately without priming it, after it dies. It only runs for that 60ish second time frame but I all I have to do is hit the start button. It initially runs pretty solid but then isles down and stops again.
i will be following this post, i have an onan 4000 doing the same thing, maybe i can learn something from this.
|
ADAD437
|
09/08/19 05:37am |
Tech Issues
|
|
RE: onan 4000 fuel filter
I had the fuel pump on our Onan 4KYFA26100K fail a few years back. On this model the filter is screwed into the suction port on the pump as shown in the pic below. The rubber fuel line goes onto the barb fitting on the filter, which is accessible from the side of the generator base. The filter can be replaced without removing the pump using a deep socket, which is (I think) a 9/16". I used a piece of dowel to plug the fuel line to prevent a siphon.
https://i.imgur.com/fL9tiGMl.jpg
Onan # for the filter
https://i.imgur.com/LsK9Rqil.jpg
interesting, yes i am having a problem with it. it will run about 3-5 minutes then start sputtering and quit, it will usually start back up fairly quick then die again.
|
ADAD437
|
08/28/19 01:09pm |
Tech Issues
|
|
RE: onan 4000 fuel filter
ok looked, it is a RV QG4000 MODEL 4KYFA26100L.
|
ADAD437
|
08/28/19 08:12am |
Tech Issues
|
|
RE: onan 4000 fuel filter
Which model exactly?
Here is my 4BGE "Onan 4000"
https://i.imgur.com/a4jcs2V.png
You can see the fuel filter. You will want to unthread it carefully and thread on a new one and be careful not to cross-thread. It's easy to cross thread the metal tubing connector if it's not lined up exactly right.
Be sure to check for leaks after installing. Do not overtighten.
Steve
didn't check model, but not like yours.filter screws in on side and hard to get to, wondering if fuel will siphon from tank if line disconeticded from filter?
|
ADAD437
|
08/28/19 08:07am |
Tech Issues
|
|
onan 4000 fuel filter
anyone replaced the fuel filter on onan 4000, easy or hard? comments please from someone who has done it. thank's in advance.
|
ADAD437
|
08/28/19 05:50am |
Tech Issues
|
|
RE: stupid move
well i only blew one board for 12 volt, thank god. it only cost 1200.00 but all is well. many thanks for all the response. i had a very good local truck repair shop take care of me. they work mostly on trucks but they are a great family owned shop. PAPPY'S TRUCK AND TRAILER, CLARKSVILLE,IND.
|
ADAD437
|
08/24/19 03:34am |
Class A Motorhomes
|
|
RE: stupid move
The disconnect has a fuse as well and there may be an additonal fuse or breaker
For that matter the Generator may have a fuse or two in the starter line as well.
Best outcome: Popped fuses and or tripped master battery breaker
Worst outcome. Fried a control board or 3
THANK YOU.
|
ADAD437
|
08/16/19 07:19pm |
Class A Motorhomes
|
|
RE: stupid move
Where do you live? Maybe someone could check this problem out for you?
at present i am in southern ind. i took it to a local family owned shop this morning but they can't get to it until monday. by the way very good shop. i need to go back to fl. where my son is. thank you all for the responses.
|
ADAD437
|
08/16/19 07:18pm |
Class A Motorhomes
|
