| |
Subject |
Author |
Date Posted |
Forum
|
 |
RE: Towing Over Wolf Creek Pass
Been across this pass many times
Drive smart and you will be fine
|
smarty
|
05/22/19 10:59am |
Roads and Routes
|
|
RE: One night running the heater and blower
We always take a second fully charged battery when we boondock. Just in case...
I think you will be fine for one nite tho...
|
smarty
|
05/22/19 10:47am |
Beginning RVing
|
|
RE: The black wire on my plug is burnt up...
You did not state if you had one but I would highly recommend a surge protector of some type
|
smarty
|
05/06/19 10:41am |
Tech Issues
|
|
RE: Carlsbad - Fort Worth
avoid this part of the world at all costs
far worse than you can imagine
|
smarty
|
03/14/19 03:32pm |
Roads and Routes
|
|
RE: fixing slide out
Did you read the instruction about pushing the mode button 6 times than pressing and holding it the seventh time until controller goes into override mode? Page 7 Here!
Yes, tired this a few times with no luck
|
smarty
|
10/02/18 08:26am |
Fifth-Wheels
|
|
RE: fixing slide out
You may have a pin you can pull to delink the motor. For all the troubles slides present they just aren't worth it.
All indications are that there is a retention screw that must be loosened to life motor up. But the slide must be out about 8 inches so that this screw can be loosened from the outside of the rig. I have no idea why this screw could not be made to be accessible from the inside of the rig...common sense to me
|
smarty
|
10/01/18 01:53pm |
Fifth-Wheels
|
|
RE: fixing slide out
Plug the motors back in find the controller hit the small black button on the controller for a few seconds this overrides the system then you can move it out
Tried this but motor does not engage. Also checked wiring and found no short. Would appear motor is dead
|
smarty
|
10/01/18 01:49pm |
Fifth-Wheels
|
|
RE: fixing slide out
There is usually a manual crank position somewhere to crank out the slide. It would help if you would post the make and model of your rig so members could help you out better. Just click "edit" on your post to add that information if you can.
Barney
This slide does not appear to have that option
|
smarty
|
10/01/18 01:48pm |
Fifth-Wheels
|
|
RE: fixing slide out
Motor will not move without the retainage screw being loosened
|
smarty
|
10/01/18 01:47pm |
Fifth-Wheels
|
|
fixing slide out
Have a bedroom slide that I need to change electric motor on. System is Swintec. Bedroom slide is all the way in and I need to get it partially out to remove motor. Unplugged motors from controller but slide will not move. How do I get the slide out so I can get to the retainer screw in the motor?
Thanks in advance
Rig is a 2015 Tesla T3212
|
smarty
|
10/01/18 09:05am |
Fifth-Wheels
|
|
RE: bedroom slide will not go out
thanks everyone for your suggestions, will start digging around this weekend
very much appreciate your guidance
|
smarty
|
09/06/18 09:03am |
Fifth-Wheels
|
|
bedroom slide will not go out
Checked the fuses all are good
Any easy peezy fixes I am not thinking about
Lippert slide system, kitchen slide works fine
It almost seems like one side wants to work while the other does not
|
smarty
|
09/04/18 01:16pm |
Fifth-Wheels
|
|
RE: tire pressure
Thanks Buc and Bob. 110psi it is
|
smarty
|
08/27/18 09:54am |
Fifth-Wheels
|
|
tire pressure
just had new G rated Sailun tires put on rig. These tires are rated at 110 psi
Our rig weights around 19,000 lbs
Am I okay to keep the psi at 90lbs or should I always keep them at 110 psi?
|
smarty
|
08/27/18 09:28am |
Fifth-Wheels
|
|
RE: fifth wheel tires
Thanks for everyone's input
Going with 14 ply
|
smarty
|
08/17/18 11:29am |
Fifth-Wheels
|
|
fifth wheel tires
Need to replace tires on my 38' fifthwheel that weighs 18,000 lbs
Tires that came with rig are five ply
I got a great deal on 12 ply tires
Any reason for not upgrading to 12 ply tires?
|
smarty
|
08/17/18 08:59am |
Fifth-Wheels
|
