RUNDLC
Elk Grove, California
Senior Member
Joined: 12/22/2008
View Profile
 Offline
|
I am doing some research on this company, I contacted HWH in Iowa and they say that Morrison's is the only company in the U.S. that they will sell aftermarket slideout parts too.
Have you or someone you know ever had work completed by this company? I am looking for good, bad or indifferent. I am scheduling an appt sometime next month and wanted some feedback from the group.
http://www.morrisonsvipcoach.com/ Sorry not sure how to do the clicky thing, anyone help??
TIA
|
RUNDLC
Elk Grove, California
Senior Member
Joined: 12/22/2008
View Profile
Offline
|
That is what the parts person at the headquarters told me. Now keep in mind I am only speaking about HWH parts. There may be others out there.
When I called Morrison's they also told me they were the only distributor for HWH aftermarket slide parts
|
jwmII
out west
Senior Member
Joined: 05/12/2003
View Profile
Offline
|
Most parts from an outfit like HWH go to O.E.Ms. (Original Equipment Manufacturers). Morrisons could fit that category. They do slideout additions on coaches not already equipped with slides.
jwmII
|
RUNDLC
Elk Grove, California
Senior Member
Joined: 12/22/2008
View Profile
Offline
|
Oops dbl post
|
RUNDLC
Elk Grove, California
Senior Member
Joined: 12/22/2008
View Profile
Offline
|
JWMII do you know of anyone that has had them install a slide?
|
|
|
jwmII
out west
Senior Member
Joined: 05/12/2003
View Profile
Offline
|
I donot know anyone who they have done a slide for. About 10 years ago I had a customer who was interested. I researched this vendor and viewed their demo coach at the Quartzsite show. Talked to one of the owners. Their demo was a class C on an older Dodge Chassis. It was impressive. Sometime in that time frame one of the Brother/owners passed away. Since that time I have not heard anything about the co. At that time they had many albums of photos of their work. Impressive. My customer did not have his done. Wasn't willing to pay the price.
|
Doug E.
Madera CA.
New Member
Joined: 11/23/2011
View Profile
Good Sam RV Club Member
Offline
|
Morrison's is located in Sanger CA. on the corner of Hwy 180 and Academy Ave. about 20 miles east of Fresno CA.
I knew 1 gettleman who had 2 slides put in his motorhomes a few years ago. He was happy with their work, this was a few years back though.
Haven't heard anything good or bad about them for awhile. I do know if I had any problems with my slides they would be doing my repairs.
|
RUNDLC
Elk Grove, California
Senior Member
Joined: 12/22/2008
View Profile
Offline
|
Spoke with the owner today, was quoted a basic price of 18k for about
a 11' slide, could be a few dollars less once he actually sees it. Hmmmmm
|
SacsTC
N. California
Senior Member
Joined: 12/05/2006
View Profile
Offline
|
RUNDLC wrote:Spoke with the owner today, was quoted a basic price of 18k for about
a 11' slide, could be a few dollars less once he actually sees it. Hmmmmm
Huh.........Keeping this one????
1999 Damon Daybreak 3270
2015 Jeep Cherokee Trailhawk
I was a good kid, now I'm making up for it
|
RUNDLC
Elk Grove, California
Senior Member
Joined: 12/22/2008
View Profile
Offline
|
Hey Sacs!! Long time, Well I am at the point of no return, I know I won't be able to sell her even with all the mods I have done for what the boss says we "have" to get, then I would need to come up with another 25K or so to move up sooooooo..... this is my next possible adventure, we really have a solid unit but just a little more room would seal my desire to just hold onto it. We are gonna have to meet up sometime.
I have been going to the Auburn area quite a bit as of late doing some home designs for a couple of clients are you near Auburn?
|
|
|
