ijon1
flint mi.
Full Member
Joined: 06/12/2007
View Profile
 Offline
|
What is a good replacement pump for my fuel pump on my fury 2910 tow hauler. It is a piece of junk and sticks.
* This post was
edited 11/02/19 03:30pm by an administrator/moderator *
|
joebedford
Sheltering at home
Senior Member
Joined: 09/03/2003
View Profile
|
Get a replacement set of gears and / or when the pump is stuck just slightly loosen the 4 bolts on the end/top plate. My pump works when it's cool, but not if it's been out in the sun.
You can also slightly sand the gears to add a bit more clearance.
|
mmasters
Fort Mill, SC
Full Member
Joined: 09/08/2006
View Profile
Good Sam RV Club Member
Offline
|
Believe it or not the gears will swell in the presence of gas. My last toy hauler, I had to open the pump head up and sand the gears twice. They are easy to come out, place the sand paper on a table and rub the gears around. Does not take much.
Mark
2019 Ford F450 26,000 miles
2020 DRV Fullhouse JX 450
2011 F450 175,000 mile (Sold)
2013 Dutchman Voltage 3950 (Sold)
2005 F350 SRW 127,000 (Sold)
2008 XLR 3850 Toyhauler (sold)
|
mapguy
Puget Sound
Senior Member
Joined: 09/02/2007
View Profile
Offline
|
ijon1 wrote:What is a good replacement pump for my fuel pump on my fury 2910 tow hauler. It is a piece of junk and sticks.
What brand model of pump?
If Great Plains RV model - get a kit for an EZ8 model -same pump just different model # to force purchase of parts thru RV dealer at increased cost. I learned the hard way.....
|
fj12ryder
Platte City, MO
Senior Member
Joined: 08/19/2003
View Profile
|
mmasters wrote:Believe it or not the gears will swell in the presence of gas. My last toy hauler, I had to open the pump head up and sand the gears twice. They are easy to come out, place the sand paper on a table and rub the gears around. Does not take much.
Mark Yeah, I had to do the same thing on our Fuzion pump.
Howard and Peggy
"Don't Panic"
|
|
|
CampingN.C.
North Carolina
Senior Member
Joined: 11/05/2004
View Profile
Offline
|
If your talking about just the handle itself, they sell a much better one at Tractor Supply. I replaced mine fairly early on cause it was sticking as well.
2018 Ram 3500 DRW CCLB Aisin 4.10 4x4
2018 Jayco Talon 413T
B&W Companion
|
ijon1
flint mi.
Full Member
Joined: 06/12/2007
View Profile
Offline
|
What do you mean replace handle?
|
dedmiston
So Cal
Moderator
Joined: 01/26/2004
View Profile
Good Sam RV Club Member
|
Slightly off topic, but what are folks using for protection since Nozzle Condom went out of business? I lost my old Nozzle Mitt and don't have protection for my nozzle end anymore.
2014 RAM 3500 Diesel 4x4 Dually long bed. AISIN trans & 4.10 rear. B&W RVK3600 hitch • 2015 Crossroads Elevation Homestead Toy Hauler ("The Taj Mahauler") • Hooligan #3
Toys:
- 18 Can Am Maverick x3
- 05 Yamaha WR450
- 07 Honda CRF250X
- 05 Honda CRF230
- 06 Honda CRF230
|
ependydad
Here and there
Senior Member
Joined: 10/17/2011
View Profile
Good Sam RV Club Member
|
dedmiston wrote:Slightly off topic, but what are folks using for protection since Nozzle Condom went out of business? I lost my old Nozzle Mitt and don't have protection for my nozzle end anymore.
1, I regret googling that based on the other search results!
2, I never realized I needed something like this? I always just threw the nozzle back into it's compartment and shut the door.
![[image]](http://web.archive.org/web/20080828180806im_/http://www.nozzlecondom.com/images/Nozzle-and-Condom-Pic-Wht-B_82YY.jpg)
I think I might get an oversized ziploc bag (Ikea has nice big ones), put it over the nozzle, and will just wrap something around the open end of the bag (big twist-tie type thing).
Should keep it clean and nice and cheap.
2017 Spartan 1245 by Prime Time
2018 Ram 3500 Crew Cab DRW w/ 4.10 gears and 8' bed
FW Hitch: TrailerSaver TS3
Learn to RV- learn about RVing - Towing Planner Calculators - Family Fulltiming FB page
|
CampingN.C.
North Carolina
Senior Member
Joined: 11/05/2004
View Profile
Offline
|
ijon1 wrote:What do you mean replace handle?
Nozzle, handle, gun, pump, I'm talking about the part that the gas comes out of. Just different terminology for the same thing.
|
|
|
