 |

|
|
wa8yxm

Davison Michigan (East of Flint)

Senior Member

Joined: 07/04/2006

View Profile

Offline
|
I got mine from General RV. but.....
What breaks normally is the striker bolt. the highest stress point on the bolt is also the weakest and they make 'em out of ... **** metal (Pot metal). I took the pieces to a metal smith (Machinest) and had him carve me a new one out of steel. 40 bucks. did a fantastic job.. soak it in oil (or boil in oil) for a bit then install... That did NOT break. Note DOOR and "Basement" are same design but different sizes... I can point you to a repair tech with a few basement bolts. (4 or 5 I forget which)( but she's in Florida this time of year.
Home was where I park it. but alas the.
2005 Damon Intruder 377 Alas declared a total loss
after a semi "nicked" it. Still have the radios
Kenwood TS-2000, ICOM ID-5100, ID-51A+2, ID-880 REF030C most times
|
wing_zealot

East of the Mississippi

Senior Member

Joined: 12/31/2007

View Profile

Offline
|
Deleted
* This post was
edited 01/27/23 01:44pm by wing_zealot *
|
Grit dog

Black Diamond, WA

Senior Member

Joined: 05/06/2013

View Profile

Offline
|
Anyone who hasn’t had a RV door lock break likely doesn’t understand how flawed of a design in general they are when it comes to being able to disassemble when the door and screen are shut.
Got a funny story about that, that if not for a couple guys who are adept at fixing most anything, would have just resulted in smashing it open and dealing with the aftermath.
2016 Ram 2500, MotorOps.ca EFIlive tuned, 5” turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold
|
wa8yxm

Davison Michigan (East of Flint)

Senior Member

Joined: 07/04/2006

View Profile

Offline
|
pianotuna wrote: Hi,
Does anyone have a source for a trimark all steel lock?
As far as I know Tri-mark does not make one
Seneca Engineering, A Machinist shop in Seneca, SC. made me a handful of Solid and I mean SOLID steel striker bolts for my Tri-Mark Basement locks.. Door locks are the same design but smaller bolts.
He can duplicate if you an send him the pieces. 40 bucks then likely 50-60 now.
|
Kober

Arizona

Senior Member

Joined: 02/01/2003

View Profile

|
Mine broke too. They build these things with cheap plastic inside to make sure they can keep selling locks. I just bought a keyless. Haven't replaced it yet.
2014 Coachmen Freelander 29qb, towing a trailer with my toys:
2020 Honda Talon SXS, or
2006 Royal Star Tour Deluxe
2008 Road Star 1100
PATRIOT GUARD RIDER, AMERICAN LEGION RIDER
Retired 25 years US ARMY, retired 24 years business owner
|
|
|
|
|
|