 |
|
|
|
PApopup
Glen Rock, PA, USA
Senior Member
Joined: 03/18/2004
View Profile
 Offline
|
On our last trip, the site was not quite level and we had to raise the entry side 3 to 4 inches. We have the newer folding steps with the adjustable legs. Given the height difference when we release the adjustable legs they actually fell out. So slid them in till they clicked and put some blocks. Worked ok.
Come to leave and have a hard time sliding them all the way into the unit. Is there a trick for getting them to work again? We hold the release but it binds very quickly. Since they folded up we left them and headed home. Now need to get them working. Any thoughts?
Bob, Kim, Gabby, & Matt">
2011 Flafstadff V-Lite 30WTBS ">
2010 Chevrolet Silverado 2500 LT Crew Cab 4X4 ">
|
Grit dog
Black Diamond, WA
Senior Member
Joined: 05/06/2013
View Profile
Offline
|
Hit them a little harder with your purse?
2016 Ram 2500, MotorOps.ca EFIlive tuned, 5” turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold
|
Boomerweps
Hills of PA
Senior Member
Joined: 04/30/2018
View Profile
Offline
|
Take them out, wipe any rust off, spray them down with lube (especially any spring loaded locking balls), reassemble. Mine uses removable pins.
2019 Wolf Pup 16 BHS Limited, axle flipped
2019 F150 4x4 SCrew SB STX 5.0 3.55 factory tow package, 7000#GVWR, 1990 CC Tow mirrors, ITBC, SumoSprings,
|
|
|
|
|
|
|
|
